With the assistance of our automated warehousing system, we are able to properly organize and stack the products in our well-structured warehouse. Thus, we ensure zero defects at buyer's end. Buyers can trust us to make delivery of consignments since; we have collaborated with reckoned transportation service providers.

DC-AC Diesel Transfer Pump that we offer is manufactured using quality approved basic material that adds durability to it. We are one of the prominent Manufacturers, Exporters and Suppliers of DC-AC Diesel Transfer Pump. It is tested on various quality parameters so as to ensure its defect-free mechanism. When it comes to delivery, we make all arrangements for quick shipment of DC-AC Diesel Transfer Pump.

Features :

• Cast iron pump body finished with anti-corrosionpaint

• Vane pump with sintered steel rotor and acetal resinvane

• By-pass valve incorporated in the pumpbody

• Direct current brush motor with permanent magnetstator

• Motor protection classIP55

• Used in intermittent service with 30-minute workcycles

• Maximum Head 10 Meters in DC Pumps and 20 MetersinACPumps.

Available in 12 and 24 Voltage versions provide with 3/4” threaded connectors on the pump body. Switch box and fuse carrier, reinforced base complete with power cables and pincers for connection to terminal strips.

Application :

• Ideal portable pump for diesel fuel, machineoil.

• As the primary system on earth-movingmachinery.

• On mobile fuel pumps on vehicles, such as pavingmachine,tractor, road roller, etc or in constructionyards.

DC / AC diesel pump Cast iron pump body complete anticorrosive paint.

Application : These pumps are made with flame proof / explosion proof motor these pumps are self priming type, centrifugal type, vertical sump pumps type, mud pump type, gear type, multistage pump type, or any other type pump can be made as per requirement of customer. These pumps are widely used to handle petrol, kerosene, diesel, oil and solvents handling. Motors can be available with CMRI & DGMS certificate on request material of pumps & sealing arrangement can be made as per customer requirements or as per material to be handled.

These special type of pumps have been designed to float in rivers, lakes and sump where level of liquid is changing constantly and sometimes liquid requires positive or low suction. Following are the special features of the pumps.

• Can Take both axial and radial loads, specially designed to take thrust loads due to high currents in rivers.
• The centre of gravity is maintained in such a way that the pump will always be in position and even if some heavy logs/animals / external forces in the river try to change its position the pump tends to come to its original floating position when the external lateral force is removed.
• Very easy to maintain: High power/energy savings as compared to high suction pumps.
• Pump and floating platform can be made from M.S, PP or SS as per requirement.
• As floating pump can run in the water , such pumps are useful for simplifying the earth work and engineering construction of pumping station, thus reducing installation area and saving 30~40% of the total project cost.
• Can solve the flood resistance problem of those rivers and lakes which have large fluctuation of water levels.
• Can be supplied up to 200 meter head and 1000 M3/hr
• Floating pumps removes the need for any civil construction on the river banks.
• Floating pumps are not affected by the fluctuations of the water (tide) levels. Since the pump is always floating, it ensures that the impeller remains submerged. Pump is under water or has very low suction head due to floating platform in surface pump.
• Since these pumps are floating , the issue of depth of suction is ruled out.
• Very useful when suction lift is very high.
• Very useful for slurry , hot water and for mining application.
• Always made as per customer's requirement and we use different type of pump and platform as per characteristics of liquid .

Advantages :

• No Seal, No Leakage
• Self Priming, No need of foot valve
• Variable flow with pump.
• Can be submerged.
• Less stock of spare to be maintain.
• No Skilled person is needed to
• operate and repair pump.
• Light weight, handy in use.
• No rotation, no wear & tear, hence
• low maintenance.
• No Charging.
• Pump can run dry.
• Stops automaticlly on closing of discharge valve.
• Can handle 2 to 10 mm sized solid particles.
• Also can be used upto accuracy 3 to 5%
• No Motor, No fire.
• In short very simple and versatile pump.

Operation Principle :

• Dry air is given as input to air valve.
• Air will push both diaphragm alternatively.
• Four ball valves will act as NRV for suction and delivery.
• As per liquid compatibility MOC of diaphragm, Valve and wet part selected.