Industrial Pumps

In order to deliver quality content, our entire production process is commenced under the strict eyes of quality examiners. Providing customized packaging solutions is our specialty and we can alter packs as per requirements of buyers. Besides this, we make sure the grade of materials is premium to ensure safety of products.

For more details please click on the links given below

 


MOQ : 1 Piece

Business Type Manufacturer, Exporter, Supplier
Brand Name Malhar
Power Solar
Pressure High Pressure
Application Submersible
Country of Origin India

Preferred Buyer From

Location Worldwide

Details:



  • These pumps are dc pumps and special made where AC power is not available.

  • One can run these pumps on car/truck battery or even on solar power.

  • DC motors are of 3000/1450 RPM and are of PMDC or BLDC type so efficiency is high and maintenance is very less.

  • All pumps are fitted with mechanical seal and we offer pumps with various material of construction.

  • Bigger pumps can be made as per customer’s requirements.

  • Pumps will be of self priming, centrifugal and gear type, piston type etc and can be used for any type of liquids like diesel, petrol, oil, water, salt water, hot water etc.


 


Technology



  • The sun rays on solar panel generate DC power , same power can be used  by two way

  • We can use DC pumps and connect it directly OR

  • we use solar controller which will convert

  • DC power in to AC power and run AC pump

  • An array of solar panels connected in series and parallel configuration generates the power and voltage required for the VFD (Variable Frequency Drive) Controller to drive the motor.

  • The DC to AC frequency converter in the solar drive converts the DC voltage input to the drive to variable 3-phase AC voltage and frequency.


 


Salient Features



  • Can be used for any kind of Motor or pump loads ranging from 1 HP to 100 HP.

  • Uses MPPT (Maximum Power Point Tracking) to deliver energy at various solar energy levels.

  • System can be used for existing pumps and motors and hence no replacement of new loads.

  • Water pumped even in morning, evening and in cloudy weather at low speed flow for over

  • 12 hours per day when we connect it with battery.

  • Long term, environment friendly, economic solution with proven technology.


 


Following Protection are Inbult in the VFD Controller



  • Panel Reverse Polarity, Short Circuit

  • Over Load

  • Over Voltage

  • Multiple pumps can be connected to single controller

  • DC Power meter included

Read More...


Yes! I am interested


MOQ : 10 Piece

Business Type Manufacturer, Exporter, Supplier
Material Metal
Finishing Polished
Driven Type Electric
Operating Type Automatic
Usage Industrial
Specialities Durable, Rust Proof, High Performance, Easy To Operate
Phase Single Phase
Corrosion Resistance Yes
Number Of Stages Single Stage

Click to view more

Preferred Buyer From

Location Worldwide

Features :

  • Oil free air and maintenance free operation as no lubrication is required. Practically Noiseless operation.
  • Available with 24 v / 48 v DC or 110 v / 230 V AC Supply voltage.
  • Available with Chemical resistant parts made from PP / PVC / SS.
  • Available as Single Stage / Double stage / Double stage Parallel Operation pumps.
  • Standard Models are with Aluminum contact parts.
Read More...


Yes! I am interested


MOQ : 10 Piece

Business Type Manufacturer, Exporter, Supplier
Driven Type Diesel
Color Grey
Condition New
Automatic Grade Automatic
Feature Cost Effective, Durable, Heavy Power, Low Fuel Consumption
Rated Voltage 230V
Country of Origin India
Material Metal

Click to view more

Preferred Buyer From

Location Worldwide

Features :

  • A Range of high quality positive displacement gear pumps for fuel injection in industrial burners.
  • These pumps provide fuel at finely controlled pressure and flow rates for optimum combustion resulting in long term fuel saving and reduced pollution.
  • The perfectly designed and perfectly finished which having lost wax method known as investment casting & having grade 30c Iron and stainless steel
  • 40 % Weight reduce compared to regular model
  • Standard mounting & easy to install.
  • Manufactured from specially selected material & processed to close to lerances for a long, trouble free working life.
  • Gear & shaft of alloy steel & heart treated.
  • Mechanical dynamic oil seal system for high temperature & high speed use, for zero leakage.
  • Self lubrications, Self priming
  • Built in pressure valve
  • Standard mounting dimensions for easy replacement, gear pump exporter

 

Applications :

  • Oil Burner, Boilers, Hydraulic drive and Pressure pump
  • Force feed lubrication
  • Booster pump for heavy diesel engineers
  • Pumping for filtration
  • Bitumen tank burner
  • Dryer burner of hot mix plant
  • Most suitable for LSHS furnace oil, L.D.O. HSD
Read More...


Yes! I am interested


MOQ : 10 Piece

Business Type Manufacturer, Exporter, Supplier
Material Metal
Condition New
Application Industrial
Feature Corrosion Resistance, Durable, Fine Finishing, Hard Structure, High Efficiency, Light Weight, Low Maintenance
Coating Coated
Durability Long Life
Resistivity Rust Resistant

Preferred Buyer From

Location Worldwide

Features :

  • Supplied Pump Connected with Flexible
  • Shaft OF 5.5 Meters.
  • Pump Design for max head to 40 meters. Max discharge 1200 LPM.
  • Pump available with Motor or Engine. Suction Size 3" and Delivery Size 2.5"
Read More...


Yes! I am interested


MOQ : 10 Piece

Business Type Manufacturer, Exporter, Supplier
Driven Type Electric
Pressure High Pressure
Application Industrial
Weight Approx 14 Kg
Size : L X W X H 450 X 275 X 325 mm
Packing Thermocol box

Preferred Buyer From

Location Worldwide

We are making DC pumps for various application as per customer’s requirement :

  • Idle for pressure booster application
  • Very useful for small RO/SODA plant (Replacement of rotary vane pump)
  • Excellent for drinking water application as all parts are of brass ( 100 % hygiene)
  • Curing at constriction site
  • Max suction lift 8 mtr
  • Very silent, no need of foot valve
  • Doubled 'Z' sealed precision ball bearings
  • TEFC motor
Read More...


Yes! I am interested


MOQ : 10 Piece

Business Type Manufacturer, Exporter, Supplier
Color Grey
Automatic Grade Semi Automatic
Power Source Hydraulic
Pressure High Pressure, Low Pressure, Medium Pressure
Application Agriculture, Industry
Voltage 220V
Type Axial Flow Pump
Country of Origin India

Click to view more

Preferred Buyer From

Location Worldwide

Applications :

  • Flood Control
  • Water Treatment
  • Shipping
  • Ground Water Development and Irrigation
  • Cooling Water (power)
  • Dewatering and Water Supply (mining)
  • Agriculture

 

OPERATING RANGE

  • Flows to 181700 m3/h (800 000 gpm)
  • Heads to 11 m (35 ft)
  • Speeds to 1770 rpm
  • Ground Water Development and Irrigation
  • Cooling Water (power)
  • Dewatering and Water Supply (mining)
  • Agriculture
  • Sizes 200 mm (8 in) to 3.1 m (123 in)
  • Settings to 8 m (25 ft)
  • The VAF is a combination of vertical high efficiency & axial flow impeller pump .
  • We have a complete range of this type of pumps which are suited for applications that require large quantities of flow with low head.
Read More...


Yes! I am interested


MOQ : 10 Piece

Business Type Manufacturer, Exporter, Supplier
Material Metal
Condition New
Automatic Grade Manual
Application Industrial
Type Hand Operated
Driven Hydraulic

Preferred Buyer From

Location Worldwide

Features :

  • Electric Motorised driven system
  • Totally Enclosed drive Mechanism
  • Heavy duty precision gear box
  • Large Air Chamber
  • Self Oiling system & quick action Relief valve
  • Totally Dependable , Reliable and Efficient performance.

 

Applications :

  • Boilers, Pressure Vessels, C.I. Mains, Castings, Gas Cylinders
  • Parts Subjected to Hydraulic Pressure Standard Accessories
  • M.S. Fabricted Pail, Brass Foot Valve
  • G.M / S.S Check Valve
  • Brass Pressure Release Cock
  • Pressure Hose With Attachments
  • Pressure Gauge
  • For Testing Up to 705 Kg/Cm2 (10,000 PS.I.).
Read More...


Yes! I am interested


MOQ : 10 Piece

Business Type Manufacturer, Exporter, Supplier
Driven Type Electric
Condition New
Automatic Grade Semi Automatic
Pressure 10-20Bar
Application Industrial
Type Rotary Vane Pump
Weight 40-50kg
Country of Origin India

Click to view more

Preferred Buyer From

Location Worldwide

Yes! I am interested


MOQ : 10 Piece

Business Type Manufacturer, Exporter, Supplier
Color Blue
Condition New
Automatic Grade Automatic
Rated Voltage 230V
Country of Origin India
Sound Sound Proof
Series SIG

Preferred Buyer From

Location Worldwide

ADVANTAGES OF SIG PUMPS :

  • Single shaft – well supported at both ends
  • High suction lift and low noise level as well as vibrations
  • High volumetric and overall efficiency
  • Continuous, pulsation free flow due to axial entry in pumping element
  • Compact and light – weight design
  • Ease of assembling and dismantling without disturbing the pipeline.
  • Choice of oil seal / Mechanical seal / gland pack.
  • Parts / Pumps interchangeable with well known brands.

 

Applications

  • INTERNAL GEAR/LOBE PUMP
  • Transfer from tank to tank
  • Emptying of barrels
  • Lubricating and cooling of bearings ,gears, mechanical seals and machine tools
  • Fuel oil booster

 

SPECIAL EXECUTIONS :

  • Specially coated internals for pumping of non –lubricating liquids.
  • Engineering plastics rotor set for chemicals & low viscosity fluids
  • Specially designed pumps for vacuum duty applications
  • Uni-directional
  • LIQUID HANDLED
  • Fuel oil
  • Lube Oil
  • Neutral liquids with lubricating properties
Read More...


Yes! I am interested


MOQ : 10 Piece

Business Type Manufacturer, Exporter, Supplier
Material Metal
Driven Type Electric
Application Industrial
Flow Rate UP TO 100 M3 / Hr
Differential Pressure 24 Bar(for more system pressures, contact factory assistance)
Viscosity UP TO 1,00,000 cst
Temperature UP TO 150 Degree C
Suction Lift 8 mlc Max

Click to view more

Preferred Buyer From

Location Worldwide

Features :



  • Separate Screw and Shaft Assembly.

  • Combination of material possible for screw & shafts.

  • Independent Material of construction for Screw & Shaft respectively.

  • Replacement needed for damaged part only.

  • Change in performance characteristics possible by changing screws only.

  • Triple Screw Pumps with external or internal bearing are available in horizontal or vertical constructions, with or without heating arrangements and have single mechanical   seals   for   shaft   sealing.

  • They  handle  all  neutral  lubricating

  • Change in pump design possible from long shaft to small shaft and Vice versa.

  • Compact Design.

  • Extremely good suction capability.

  • Various Combinations Of Materials available.

  • Pumps With Replaceable Liners.

  • Partial/Full Heating Jacket Available In Various Designs.

  • Different Sealing Arrangements Possible.

  • Low NPSH Requirement.

  • Casing Available in different Cast And Fabricated Design.

  • Low maintenance cost.


 


MATERIAL OPTIONS



  • Housing Parts : AISI304, AISI316, AISI316L

  • Rotor & Shaft : AISI304, AISI316, AISI316L

  • Stator : NBR, HNBR, EPDM, CSM, Q white, food grade, abrasion resistant & high temperature resistant variants.

Read More...


Yes! I am interested


MOQ : 10 Piece

Business Type Manufacturer, Exporter, Supplier
Material Metal
Driven Type Electric
Application Industrial
Type Twin Screw Pump
Flow Rate UP TO 100 M3 / Hr
Differential Pressure 24 Bar(for more system pressures, contact factory assistance)
Viscosity UP TO 1,00,000 cst
Temperature UP TO 150 Degree C
Suction Lift 8 mlc Max

Click to view more

Preferred Buyer From

Location Worldwide

Features :



  • Separate Screw and Shaft Assembly.

  • Combination of material possible for screw & shafts.

  • Independent Material of construction for Screw & Shaft respectively.

  • Replacement needed for damaged part only.

  • Change in performance characteristics possible by changing screws only.

  • Triple Screw Pumps with external or internal bearing are available in horizontal or vertical constructions, with or without heating arrangements and have single mechanical   seals   for   shaft   sealing.

  • They  handle  all  neutral  lubricating

  • Change in pump design possible from long shaft to small shaft and Vice versa.

  • Compact Design.

  • Extremely good suction capability.

  • Various Combinations Of Materials available.

  • Pumps With Replaceable Liners.

  • Partial/Full Heating Jacket Available In Various Designs.

  • Different Sealing Arrangements Possible.

  • Low NPSH Requirement.

  • Casing Available in different Cast And Fabricated Design.

  • Low maintenance cost.


 


MATERIAL OPTIONS



  • Housing Parts : AISI304, AISI316, AISI316L

  • Rotor & Shaft : AISI304, AISI316, AISI316L

  • Stator : NBR, HNBR, EPDM, CSM, Q white, food grade, abrasion resistant & high temperature resistant variants.

Read More...


Yes! I am interested


MOQ : 1 Piece(s)

Business Type Manufacturer, Exporter, Supplier, Retailer, Wholesaler
Product Code MP
Port Ahmedabad, kandla, mundra
Payment Terms L/C, T/T
Delivery Time As per customer requirement
Packaging Details Export Worthy

Preferred Buyer From

Location Worldwide

Application: 

Public utilities :

  • For pumping muddy water, sewage, polluted liquids, solid and in swimming pool.
  • Dewatering Basements, Trenches, Construction sites.
  • Onboard shift, as bilge, for desk wash & engine cooling
  • Tiles & Marble factories, effluent plants.

 

Mobile Machinery :

  • Cooling water for marine engines and shovels.
  • Any application where priming is to be avoided.

 

Industry : Transfer of clean or dirty neutral, acid or alkali liquids containing sand, mud or solids in suspension; clean or dirty low viscosity petroleum product or solvents; milk of lime, caustic soda; washing, cooling, circulation; smoke scrubbing; emergency duty.

 

Civil engineering : Flood drainage; sewage pumping; fire fighting; recovery of dangerous liquids.

 

Naval duty : Loading and unloading; bilge pumping; washing, fire fighting, stripping, sanitary duty and circulation.

 

Waste treatment: pumping polluted, hot or corrosive waste water containing sand, mud or solids in suspension; dosing neutralizing liquids; pumping out settled sludge.

 

Construction industry : Dewatering excavation, canals or ponds; ground water dewatering with w ell point system or drains; water supply from wells or canals; hosing down concrete castings.

 

Agriculture : Surface irrigation; liquid manure oxygenation; transfer and spraying liquid manure or fertilizers, distribution of liquid animal feed; transfer of must; washing

Read More...


Yes! I am interested


Business Type Manufacturer, Exporter, Supplier, Retailer, Wholesaler
Material Plastic
Plastic Type PP
Application Liquid Use
Pressure Medium Pressure, High Pressure
Transparency Clear
 Melting Point 208 (98) Deg F (deg C)
Download View

Preferred Buyer From

Location Worldwide

We have a team of professionals who keep their vigil eyes on the entire lot that is stored in the warehouse. This unit keeps the lot free from the factors like duct, rain, sunlight, etc. Our company is capable of delivering consignments on time owing to an efficient trading network we have.

 

Features :

  • Small size bare / monobloc poly propylene pumps.
  • Fitted with seal / gland or PTFE bellow Mechanical seal.
  • Shaft is of SS-304 / 316 with ceramic coating and (PTFE coating ptional)
  • Very economical models as pumps made with minimum parts.
  • Very easy maintenance.


Application : Phosphoric acid plants, Gas washing plants, Rayon plants, caustic soda plants for corrosive acids & basics, effluent treatment handling.

Read More...


Yes! I am interested


Business Type Manufacturer, Exporter, Supplier, Retailer, Wholesaler
Flow Rate Up to 100 M3 / Hr
Differential Pressure 24 Bar
Viscosity Up to 1,00,000 Cst
Temperature Up to 150°C
Suction Lift 8 mlc Max
Download View

Preferred Buyer From

Location Worldwide

Applications : The main components which characterize the pump are a metallic single helical rotary part ROTOR and fixed double helical resilient polymer part STATOR in which the rotor turns and thereby a complex progressive sealing line (cspl) is maintanined. Whilst the rotor rotates inside the stator, the cavities formed between them progresses from suction to discharge end, gently carrying the media.

 

Drive Arrangements : 

  • DIRECT drive lectric motor, geared motor, gear box, Mechanical Speed Variator, Eddy Current DC Drive, Hydraulic, Pneumatic, Petrol & Diesesl Engines.
  • For accurate and variable flow rates, AC Variable frequenc Drives can be used.

 

Material Options :

  • Housing Parts : AISI304, AISI316, AISI316L
  • Rotor & Shaft : AISI304, AISI316, AISI316L
  • Stator : NBR, HNBR, EPDM, CSM, Q

 

White, food grade, abrasion resistant & high temperature resistant variants.

Read More...


Yes! I am interested


MOQ : 1 Piece(s)

Business Type Manufacturer, Exporter, Supplier, Retailer, Wholesaler
Download View
Product Code SP
Port Ahmedabad, kandla, mundra
Payment Terms L/C, T/T
Packaging Details Export worthy

Preferred Buyer From

Location Worldwide

Application : All clear liquids without solid suspensions like diesel, petrol, LPG, oil, solvents, syrup, dm water, chemicals, steam boiler feeding, evacuation of condensate water, boosting of pressure, as a drum/barrel pump.

 

Features : 

  • All wetted parts of pumps are made from lost wax process (investment casting), so surface finish is excellent. Smooth flow path/ hydraulic passage and no casting defects like blow holes, cracks etc. are present.
  • Centripetal / regenerative impeller for better suction.
  • Pumps will be normally available in CF-8m /CF-8 (Gun metal, Alloy-20) and also in other material as per customer's requirements.
  • Single /multistage pumps to handle crystal clear liquids for high pressure duties.
  • Very quick priming & no need of foot valves.
  • Very high suction capacity up to 8 meters without much noise
  • Various types of sealing arrangements as per customer's liquid's characteristics.
  • Normally fitted with carbon/ceramic seal faces with teflon cup and viton rubber.
  • Pumps are available in monoblock and in bare type also with flameproof motor.
  • All motors are of "TEFC" type
  • Pump can be offered with electro polishing for some special requirements.
  • Can handle temperature up to 80oC
  • Trolley mount available.
  • Also available with 120 Volt / 60 Hz.
  • Custom built pumps are available.
Read More...


Yes! I am interested


MOQ : 1 Piece(s)

Business Type Manufacturer, Exporter, Supplier, Retailer, Wholesaler
Application Transfer From Tank To Tank
Brand Name Malhar
Model Number SIG
Place of Origin India
Capacity 10.50m3/hr
Flow rate 175LPM
Product Code SIG
Port Ahmedabad, kandla, mundra
Payment Terms L/C, T/T
Delivery Time As per customer requirement
Packaging Details Export worthy

Click to view more

Preferred Buyer From

Location Worldwide

the gear pump are based on the proven rotary trochoidal design – gerotor principal. these pumps are designed to meet specific demands of oem’s.

the performance of the gear pump makes them an ideal choice for various industrial applications.

special executions :

  • specially coated internals for pumping of non –lubricating liquids.
  • engineering plastics rotor set for chemicals & low viscosity fluids
  • specially designed pumps for vacuum duty applications
  • uni-directional


advantages of gear pump :

  • single shaft – well supported at both ends
  • high suction lift and low noise level as well as vibrations
  • high volumetric and overall efficiency
  • continuous, pulsation free flow due to axial entry in pumping element
  • compact and light – weight design
  • ease of assembling and dismantling without disturbing the pipeline.
  • choice of oil seal / mechanical seal / gland pack.
  • parts / pumps interchangeable with well known brands.


typical application ::

  • transfer from tank to tank
  • emptying of barrels
  • lubricating and cooling of bearings ,gears, mechanical seals and machine tools
  • fuel oil booster


liquids handled :

  • fuel oil
  • lube oil
  • neutral liquids with lubricating properties
Read More...


Yes! I am interested


MOQ : 1 Piece(s)

Business Type Manufacturer, Exporter, Supplier, Retailer, Wholesaler
Download View
Port Ahmedabad, kandla, mundra
Payment Terms L/C, D/P, T/T, Other
Delivery Time within 4 days
Packaging Details export worthy

Preferred Buyer From

Location Worldwide

Salient Features :

  • These Pumps are meant for high Mechanical Efficiency means less energy Consumption, Lower Cost Smaller Motors, Lower Drive Costs.
  • Easy-clean pump of head which is ideal for in place cleaning, or can be rapidly stripped for manual cleaning, without disconnecting the pipe work.
  • Positive, Uninterrupted Displacement by specially designed rotors creates a steady,gentle pumping action which does not shear, agitate or aerate the product.
  • Pumping chambers are without pockets or crevices to harbor bacteria or contaminants. No Contact between moving parts and no internal bearings in the pump head.
  • Solid stainless steel, ASI 316 quality, pump head, rotors and shafts. Food quality rubber covered and plastic rotors are also available.
  • Robust, Cast Iron gear case enclosing oil Lubricated rolling bearings are precision timing gears.
  • Generous distance separating the pump head from the gear case.
  • End Connection / Port Flanged / Threaded – Customized.

 

Typical Applications for Positive Displacement

  • Dairy : Cream, Milk, Cheese, Curd & Whey, Cottage, Cheese, Yogurt, Margarine, Butter
  • Bakery : - Batters, Flavorings, Frostings, Fruit Fillings, Fat & Oils , Sweeteners , Yeast Slurry Dough.
  • Meat Packing : Meat-Emulsions, Ground Meat, Pet Foods, Extracts , Minced Meat , Sausage Meat.
  • Beverage : Beer , Wort , Yeast , Alcohols & Wines soft Drinks , Fruit Concentrates , Fruit Drinks , Essences.
  • Pharmaceutical : Pill Pastes , Syrup , Slurries , Extracts , Latex Emulsion.
  • Canning :- Tomato Paste , Fruit Paste , Cream Style , Vegetables , slurries , Puddings , Jams , Jellies , Salads Dressings , Mayonnaise , Baby Foods , Soups , Stews.
  • Confectionery : Syrups , Cream Fillings , Chocolates , Coffee Caramel.
  • Cosmetics : Heand & Face Creams , Lotion Shampoos , Dyes , Alcohols , Essential Oils.

 

Options :

  • Manual Control By-pass Relief Valve
  • Jacked Rotor case
  • Electric Heating Tapes
  • Trolley
Read More...


Yes! I am interested


Business Type Manufacturer, Exporter, Supplier, Retailer, Wholesaler
Download View

Preferred Buyer From

Location Worldwide

Product Details :

  • These pumps are dc pumps and special made where AC power is not available.
  • One can run these pumps on car/truck battery or even on solar power.
  • DC motors are of 3000/1450 RPM and are of PMDC or BLDC type so efficiency is high and maintenance is very less.
  • All pumps are fitted with mechanical seal and we offer pumps with various material
  • of construction.
  • Bigger pumps can be made as per customer’s requirements.
  • Pumps will be of self priming, centrifugal and gear type, piston type etc and can be used for any type of liquids like diesel, petrol, oil, water, salt water, hot water etc.

 

Technology

  • The sun rays on solar panel generate DC power , same power can be used by two way
  • We can use DC pumps and connect it directly OR
  • We use solar controller which will convert
  • DC power in to AC power and run AC pump
  • An array of solar panels connected in series and parallel configuration generates the power and voltage required for the VFD (Variable Frequency Drive) Controller to drive the motor.
  • The DC to AC frequency converter in the solar drive converts the DC voltage input to the drive to variable 3-phase AC voltage and frequency.

 

Salient Features :

  • Can be used for any kind of Motor or pump loads ranging from 1 HP to 100 HP.
  • Uses MPPT (Maximum Power Point Tracking) to deliver energy at various solar energy levels.
  • System can be used for existing pumps and motors and hence no replacement of new loads.
  • Water pumped even in morning, evening and in cloudy weather at low speed flow for over
  • 12 hours per day when we connect it with battery.
  • Long term, environment friendly, economic solution with proven technology.
Read More...


Yes! I am interested


Price : 3,000.00 / Piece(s)
Get Best Price

MOQ : 1 Piece(s)

Business Type Manufacturer, Exporter, Supplier, Retailer, Wholesaler
Pump Type Manual LPG Pump Piston Type 4 Way Non Return Valve Arrangement
Pump Make Malhar
Pump Capacity 15 kg/15 Minute i.e. 1 kg/Minute depend on nos of stroke per minute
Pump Model MMLPG-1
Suction X Delivery Sizes ¼ ” x ¼
Maximum Pressure 5 Kg/Cm2
Pump Weight 6 Kg Approx
Payment Terms D/A, T/T, Other
Packaging Details export worthy

Click to view more

Preferred Buyer From

Location Worldwide

Yes! I am interested


Business Type Manufacturer, Exporter, Supplier, Retailer, Wholesaler
Application Water Supply
Weight 10-15kg
Voltage 220V
Theory Self-priming
Automatic Grade Semi Automatic
Power 2Kw
Driven Type Electric
Pressure 1-5Bar
Warranty 1year

Click to view more

Preferred Buyer From

Location Worldwide

located in ahmedabad(india), we are actively involved in bringing forth a high quality array of products in the market. We ensure the products we provide buyers with are as per international quality management systems.

 

features :

  • can withstand wide voltage fluctuation – from 300-440 volts.
  • suction lift up to 7.5 meters.
  • top flat efficiency curve : minimum variation in efficiency in entire operating range
  • efficiency at par with internationally available pumps – higher up to 10 points than minimum required by indian standards specification
  • models are with ip – 44 protection. Models with ip – 55 protection are also available on request
  • class of insulation ‘b’ ( ‘f’ class for 9.3 kw and 11.0 kw ratings).
  • designed to prevent overloading and motor burning
  • dynamically balanced rotating parts ensure minimum vibrations
  • replaceable wearing parts and hence longer life
  • designed for automatic air release during priming
  • continuous rated motor
  • inside and outside of pump covered  by  anticorrosive paint


applications :

  • industries for clear water handling
  • water supply for domestic use in apartments, buildings and hotels.
  • mmp series three phase pumps : single stage, high speed horizontal, centrifugal , monobloc with volute type delivery casing


range :

  • head : 6-52 meters
  • capacity : 19.0-2.0 liters per second
  • power rating : 0.37 kw to 5.5 kw (0.5 hp to 7.5 hp )

     
material of construction standard supply :

  • impeller : cast iron
  • delivery casing : cast iron
  • motor body : cast iron
  • shaft : en -8
  • shaft sleeve : ss-410


optional supply :

  • impeller : bronze / stainless steel
  • shaft : stainless steel
  • shaft sleeve : chrome steel
Read More...


Yes! I am interested


Business Type Manufacturer, Exporter, Supplier, Retailer, Wholesaler
Capacity From 10 LPM, Upto 750 LPM
Head Upto 40 Mtrs
Material of Construction Poly Propylene Glass Filled , PVDF upto 110 Deg C & SS-316
Download View

Preferred Buyer From

Location Worldwide

Magnetic drive design eliminates the conventional method of shaft coupling. Hence the pump casing is fully sealed from drive end which gives away the use of conventional sealing system . There is no seal used and so no troublesome seal repairing and replacement , leakage or production lost. Impeller and drive magnets are permanent rare earth magnets. They prevent slippage and ensure that full motor horsepower is converted into pumping power. All Pumps are rated for continuous duty with class “E” Insulation. All pumps are Centrifugal Semi-Open Impeller Type pumps and need priming before start up. SS-316 Magnetic pumps are available upto 5 HP

 

Applications & User Industries : Ideal for transfer of corrosive chemicals , plating chemicals , acids, dyes , solvents , toxic & fuming liquids , petrol , kerosene etc. Useful in chemical industries , pharmaceuticals and food processing industries. Electroplating , Galvanizing / Anodizing plants. Laboratory equipments and PCB palnts. Medical equipments and X-Ray film plants. Textile Dyeing houses. Liquid dispencing machines and Chemical Filtration equipments. For hazardous duty conditions with flame proof motors.High Efficiency due to permanent magnet power coupling.

 

Advantages Features : 100% Leak Proof pumps due to magnetic drive arrangement. No shaft seal is used which automatically solves the problem of seal leakage and wear & tear. Friction free operation for reduced power consumption. High power permanent magnets ensure full power transfer and eliminates slippage. All pumping parts are Non-metallic, Which gives superior corrosion resistance, Simple and easy to operate, has Long life , is reliable and has trouble free operation.

 

Operating Temp : PP upto 80 deg C , PVDF upto 110 deg C Special Pumps for high temperature upto 150ºC and 250ºC for SS-316.

Read More...


Yes! I am interested


Business Type Manufacturer, Exporter, Supplier, Retailer, Wholesaler
Automatic Grade Semi Automatic
Driven Type Hydraulic
Pressure High Pressure, Medium Pressure
Structure Diaphragm Pump
Warrenty 1year
Application Testing Measurement

Preferred Buyer From

Location Worldwide

Our capacious warehouse is installed with all required amenities essential for safe storage of the products. Furthermore, our warehousing system is efficiently managed by our team of experts. We are comfortable with online and traditional payment methods. Our policies related to payment procedures are transparent. We believe in professionally managing payment agreements.

 

Features :

  • Oil - less construction (no lubricating oil or grease required) needs no
  • maintenance.
  • High pressure output comes from efficiency-oriented Â�gno
  • nonsenseÂ�h design
  • Differential operation (one suction and two discharges per
  • cycle)keeps the discharge fluctuations very low.
  • Close coupled construction eliminates problems normally associated
  • with the motor drive, such as belt slipping.
  • Design that fully utilizes rolling frictions (utility model and design
  • registration being applied for)keeps the starting torque to minimum
  • and provides maximum output.
  • Simple and rugged construction permits easy disassembly cleaningand re assembly.
  • Compact and super lightweight structure makes it handy and portable.
  • Newly developed universal nozzle
  • permits almost every washing job with wase.


Application :

  • Air conditioner cleaning.
  • Car engine compartment cleaning.
  • Washing and finishing in plasterer
  • work.
  • Food processing equipment cleaning.
  • Farm tool and machine cleaning
  • Insecticide spraying in gardens and to
  • trees
  • Printing machine cleaning.
  • Steel pipe cleaning.
  • Hydro testing.
Read More...


Yes! I am interested



Raise your Query

Hi! Simply click below and type your query.

Our experts will reply you very soon.

WhatsApp Us